Skip to main content

MinkaAire Dyno-XL F1001

MinkaAire Dyno-XL F1001-Heirloom Bronze Finish Barnwood Blades. 


52" ceiling fan with LED light. 
And a 1 foot down rod. 

Comments

Popular posts from this blog

Cable lift and light installation

Nice crystal light. This light is mounted on a cable that lowers and raises. So the end customer can clean it. We put the crystals on the light while it was at ground level. We also tested the light out while it was at ground level. This is how I tested the light before raising it to the top We had to add this flat steal bar into the light in order to reinforce the light. then we raise the light up with the lift in the attic.

Automatic Lighting For Make-up Mirrors

We installed some Diode LED Tape lights today in a master bathroom cabinet. The lights come on automatically when you open the door of the cabinet is opened. Doors are open and the LED lights come on automatically when you open the door with an IR switch. Doors closed and LED lights are off. Close-up of the IR Switch. Video of the lights turning on and off with the cabinet door. If you would like this in your home please contact the following: Designer: Sharon Whitney www.distinctlyyoursdesign.com or Electrical Contractor: Christopher Burke www.hiddentechnologyinc.com

TV install

Here is a small TV install, done by Hidden Technology ( www.hiddentechnologyinc.com ) and Magical Home Theaters ( http://www.magicalhts.com/ )