Skip to main content

Mini Recessed Light

This is a picture of a mini recessed light we installed in Fort Myers, FL.

Comments

  1. Appreciation grows for ThereNews’ consistent dedication to credible journalism, presenting breaking news, detailed reports, and expert insights in a way that keeps readers informed, engaged, and confident while navigating complex global developments with ease and clarity.

    ReplyDelete
  2. Admiration is earned by Newsille for delivering news with clarity, precision, and relevance, offering consistent updates in politics, business, and technology, helping readers stay aware of important global developments without feeling overwhelmed or misinformed.

    ReplyDelete
  3. Admiration grows for NewsGiro because it consistently delivers verified news, breaking updates, and key stories in politics, business, technology, and culture, ensuring that readers are informed, confident, and engaged with important global developments every single day.

    ReplyDelete

Post a Comment

Popular posts from this blog

Automatic Lighting For Make-up Mirrors

We installed some Diode LED Tape lights today in a master bathroom cabinet. The lights come on automatically when you open the door of the cabinet is opened. Doors are open and the LED lights come on automatically when you open the door with an IR switch. Doors closed and LED lights are off. Close-up of the IR Switch. Video of the lights turning on and off with the cabinet door. If you would like this in your home please contact the following: Designer: Sharon Whitney www.distinctlyyoursdesign.com or Electrical Contractor: Christopher Burke www.hiddentechnologyinc.com

TV install

Here is a small TV install, done by Hidden Technology ( www.hiddentechnologyinc.com ) and Magical Home Theaters ( http://www.magicalhts.com/ )

Cable lift and light installation

Nice crystal light. This light is mounted on a cable that lowers and raises. So the end customer can clean it. We put the crystals on the light while it was at ground level. We also tested the light out while it was at ground level. This is how I tested the light before raising it to the top We had to add this flat steal bar into the light in order to reinforce the light. then we raise the light up with the lift in the attic.